• 医学文献
  • 知识库
  • 评价分析
  • 全部
  • 中外期刊
  • 学位
  • 会议
  • 专利
  • 成果
  • 标准
  • 法规
  • 临床诊疗知识库
  • 中医药知识库
  • 机构
  • 作者
热搜词:
换一批
论文 期刊
取消
高级检索

检索历史 清除

医学文献 >>
  • 全部
  • 中外期刊
  • 学位
  • 会议
  • 专利
  • 成果
  • 标准
  • 法规
知识库 >>
  • 临床诊疗知识库
  • 中医药知识库
评价分析 >>
  • 机构
  • 作者
热搜词:
换一批

上颈椎三维六面体网格有限元模型的建立及有效性验证

Development and validation of a three-dimensional hexahedral finite element model of the upper cervical spine

摘要:

目的 改善目前国内上颈椎有限元模型质量,建立具有详细解剖结构的上颈椎三维非线性六面体网格有限元模型并验证其有效性,以期应用于临床相关生物力学研究.方法 对一名健康成年男性志愿者,采用16排螺旋CT机进行0.5 mm薄层扫描,获得枕骨底C0到C3的体层图像数据并以Dicom格式保存.将数据导入Mimics 10.01软件,进行上颈椎三维几何模型重建,利用ICEM软件对C0~ C3三维重建模型进行六面体网格划分,关节软骨面间隙为0.5 mm,终板厚0.2 mm,关节软骨面定义为滑动接触,摩擦系数设为0.1.再运用Hypermesh V10.0调整网格质量,加载韧带,初步建立上颈椎(C0~ C3)三维六面体单元有限元模型.随后进行材料赋值、边界约束,模拟模型产生前屈、后伸、旋转、侧屈运动,将数据导入有限元软件ABAQUS 6.11进行各椎体三维运动的计算分析.最后将模型的三维活动度(ROM)及各工况下的应力云图与体外实验及其他模型文献数据进行有效性对比验证.结果 建立了具有详细解剖结构的上颈椎三维非线性六面体有限元模型,整个模型共30 550个节点和41 909个单元,模型运动范围及应力分布与文献数据相符合.结论 建立的上颈椎有限元模型具有较高的真实性,可应用于临床相关生物力学研究.

更多
abstracts:

Objective To improve the current quality of the upper cervical spine finite element models in China by developing and validating an anatomically detailed three-dimensional hexahedral finite element model of the upper cervical spine for use in clinically relevant biomechanical research.Methods The finite element model was developed with detailed anatomy from 16-slice computed tomographic images of the occiput to the C3 with 0.5 mm thickness from a healthy male subject.The image data were saved in Dicom format,and then imported into the Mimics 10.01 software for reconstructing three-dimensional geometric model of the upper cervical spine.By using the ICEM software,the C0-C3 three-dimensional hexahedral finite element model was reconstructed,with the thickness of the endplates set to 0.2 mm,the gap of facet joints set to 0.5 mm and defined as sliding contact with the friction coefficient being 0.1.Then,the Hypermesh V10.0 software was employed to adjust the mesh quality,load the ligament,and preliminarily develop a three-dimensional hexahedral finite element model of the upper cervical spine (C0-C3).Subsequently,the movements of bending forward,dorsal flexion,rotation,lateroversion were generated through the assignment of materials,the constraint of boundary and the stimulation of models.The resultant data were imported into the ABAQUS 6.11 software for the analysis of the three-dimensional motion of each vertebral level.Finally,the stress nephogram of the model's three-dimensional range of motion (ROM) and stress distribution were compared with in vitro experiments and other published data for efficacy validation.Results An anatomically detailed three-dimensional hexahedral finite element model of the upper cervical spine was developed,which consisted of 30 550 nodes and 41 909 elements.The ROM and stress distribution coincided with the data from published literatures.Conclusion The finite element model of the upper cervical spine developed in this study appears to show high authenticity for use in clinically relevant biomechanic studies.

More
作者: 王威 [1] 蔡贤华 [1] 王志华 [2] 刘海波 [2] 徐峰 [1] 刘曦明 [1] 康辉 [1] 赵继 [1]
栏目名称: 论著
DOI: 10.3760/cma.j.issn.1674-1927.2014.04.005
发布时间: 2014-12-17
基金项目:
全军医学科学研究“十一五”计划攻关课题 武汉市高新技术产业发展行动计划攻关课题
  • 浏览:216
  • 下载:41

加载中!

相似文献

  • 中文期刊
  • 外文期刊
  • 学位论文
  • 会议论文

加载中!

加载中!

加载中!

加载中!

扩展文献

特别提示:本网站仅提供医学学术资源服务,不销售任何药品和器械,有关药品和器械的销售信息,请查阅其他网站。

  • 客服热线:4000-115-888 转3 (周一至周五:8:00至17:00)

  • |
  • 客服邮箱:yiyao@wanfangdata.com.cn

  • 违法和不良信息举报电话:4000-115-888,举报邮箱:problem@wanfangdata.com.cn,举报专区

官方微信
万方医学小程序
new翻译 充值 订阅 收藏 移动端

官方微信

万方医学小程序

使用
帮助
Alternate Text
调查问卷