首页> ACS applied materials & interfaces> High-Fidelity Replica Molding of Glassy Liquid Crystalline Polymer Microstructures.

High-Fidelity Replica Molding of Glassy Liquid Crystalline Polymer Microstructures.

导出 LinkOut

翻译打印收藏纠错

第一作者： Hangbo,Zhao

第一单位： Department of Mechanical Engineering and Laboratory for Manufacturing and Productivity, Massachusetts Institute of Technology , 77 Massachusetts Avenue, Cambridge, Massachusetts 02139, United States.

作者： Hangbo,Zhao ^[1] ; Jeong Jae,Wie ^[2] ; Davor,Copic ^[3] ; C Ryan,Oliver ^[1] ; Alvin,Orbaek White ^[1] ; Sanha,Kim ^[1] ; A John,Hart ^[4]

作者单位： Department of Mechanical Engineering and Laboratory for Manufacturing and Productivity, Massachusetts Institute of Technology , 77 Massachusetts Avenue, Cambridge, Massachusetts 02139, United States. ^[1] Department of Mechanical Engineering and Laboratory for Manufacturing and Productivity, Massachusetts Institute of Technology , 77 Massachusetts Avenue, Cambridge, Massachusetts 02139, United States.;Department of Polymer Science and Engineering, Inha University , 100 Inha-ro, Nam-gu, Incheon 402-751, Republic of Korea. ^[2] Department of Mechanical Engineering, University of Michigan , 2350 Hayward Street, Ann Arbor, Michigan 48109, United States. ^[3] Department of Mechanical Engineering and Laboratory for Manufacturing and Productivity, Massachusetts Institute of Technology , 77 Massachusetts Avenue, Cambridge, Massachusetts 02139, United States.;Department of Mechanical Engineering, University of Michigan , 2350 Hayward Street, Ann Arbor, Michigan 48109, United States. ^[4]

关键词 actuation liquid crystalline polymer microstructures replica molding surfaces

医学主题词液晶(Liquid Crystals);可湿性(Wettability)

DOI 10.1021/acsami.6b00785

PMID 26943057

发布时间 2016-12-30

翻译满意度评价：

准确一般字义偏差语意偏离译文作用小提交