首页> Sensors (Basel, Switzerland)> Using Low-Cost Sensors to Develop a High Precision Lifting Controller Device for an Overhead Crane-Insights and Hypotheses from Prototyping a Heavy Industrial Internet Project.

Using Low-Cost Sensors to Develop a High Precision Lifting Controller Device for an Overhead Crane-Insights and Hypotheses from Prototyping a Heavy Industrial Internet Project.

导出 OA

翻译打印收藏纠错

第一作者： Heikki,Sjöman

第一单位： Faculty of Engineering Science and Technology, Norwegian University of Science and Technology, Richard Birkelandsvei 2B, 7491 Trondheim, Norway. heikki.sjoman@ntnu.no.

作者： Heikki,Sjöman ^[1] ; Juuso,Autiosalo ^[2] ; Jari,Juhanko ^[3] ; Petri,Kuosmanen ^[4] ; Martin,Steinert ^[5]

作者单位： Faculty of Engineering Science and Technology, Norwegian University of Science and Technology, Richard Birkelandsvei 2B, 7491 Trondheim, Norway. heikki.sjoman@ntnu.no. ^[1] Department of Mechanical Engineering, Aalto University, Otakaari 4 (K1), 02150 Espoo, Finland. juuso.autiosalo@aalto.fi. ^[2] Department of Mechanical Engineering, Aalto University, Otakaari 4 (K1), 02150 Espoo, Finland. jari.juhanko@aalto.fi. ^[3] Department of Mechanical Engineering, Aalto University, Otakaari 4 (K1), 02150 Espoo, Finland. petri.kuosmanen@aalto.fi. ^[4] Faculty of Engineering Science and Technology, Norwegian University of Science and Technology, Richard Birkelandsvei 2B, 7491 Trondheim, Norway. martin.steinert@ntnu.no. ^[5]

关键词 Industrial Internet Internet of Things Wayfaring iterating prototyping

DOI 10.3390/s18103328

PMID 30287786

发布时间 2018-11-14

翻译满意度评价：

准确一般字义偏差语意偏离译文作用小提交