作者单位：
Institute of Process Equipment and Control Engineering, Zhejiang University of Technology, Hangzhou 310032, China. ybli@zjut.edu.cn.
[1]
Engineering Research Center of Process Equipment and Remanufacturing, Ministry of Education, Hangzhou 310032, China. ybli@zjut.edu.cn.
[2]
Institute of Process Equipment and Control Engineering, Zhejiang University of Technology, Hangzhou 310032, China. 17857685226@163.com.
[3]
Institute of Process Equipment and Control Engineering, Zhejiang University of Technology, Hangzhou 310032, China. lvcykk@163.com.
[4]
Institute of Process Equipment and Control Engineering, Zhejiang University of Technology, Hangzhou 310032, China. zlgao@zjut.edu.cn.
[5]
Engineering Research Center of Process Equipment and Remanufacturing, Ministry of Education, Hangzhou 310032, China. zlgao@zjut.edu.cn.
[6]
Zhejiang Jindun Pressure Vessel Co. Ltd., Shaoxing 312300, China. maxiakang@126.com.
[7]
Institute of Process Equipment and Control Engineering, Zhejiang University of Technology, Hangzhou 310032, China. jinweiya@zjut.edu.cn.
[8]
Engineering Research Center of Process Equipment and Remanufacturing, Ministry of Education, Hangzhou 310032, China. jinweiya@zjut.edu.cn.
[9]
Zhejiang Provincial Special Equipment Inspection and Research Institute, Hangzhou 310016, China. 13906536843@139.com.
[10]
Key Laboratory of Special Equipment Safety Testing Technology of Zhejiang Province, Hangzhou 310016, China. 13906536843@139.com.
[11]
Zhejiang Provincial Special Equipment Inspection and Research Institute, Hangzhou 310016, China. wangfh@zjtj.org.
[12]
Key Laboratory of Special Equipment Safety Testing Technology of Zhejiang Province, Hangzhou 310016, China. wangfh@zjtj.org.
[13]
DOI
10.3390/ma12081351
PMID
31027195
发布时间
2020-10-01
换一批
换一批
