3D-Printed micro-optofluidic device for chemical fluids and cells detection.

导出 LinkOut

翻译打印收藏纠错

作者： Fabiana,Cairone ^[1] ; Santi,Davi ^[1] ; Giovanna,Stella ^[1] ; Francesca,Guarino ^[2] ; Giuseppe,Recca ^[3] ; Gianluca,Cicala ^[4] ; Maide,Bucolo ^[5]

作者单位： Department of Electrical Electronic and Computer Science Engineering, University of Catania, viale A. Doria 6, 95125, Catania, CT, Italy. ^[1] Department of Biomedical and Biotechnological Science, University of Catania, viale A. Doria 6, 95125, Catania, CT, Italy. ^[2] National Research Council of Italy - IPCB Institute for Polymers, Composites and Biomaterials, via Gaifami 18, 95126, Catania, CT, Italy. ^[3] Department of Civil Engineering and Architecture, University of Catania, viale A. Doria 6, 95125, Catania, CT, Italy. ^[4] Department of Electrical Electronic and Computer Science Engineering, University of Catania, viale A. Doria 6, 95125, Catania, CT, Italy. maide.bucolo@unict.it. ^[5]

关键词 Laser-fluid interaction Micro-optics Microfluidics Real-time monitoring Two-phase flow

主题词细胞分离(Cell Separation);流体动力学(Hydrodynamics);芯片实验室装置(Lab-On-A-Chip Devices);光学设备(Optical Devices);结果可重复性(Reproducibility of Results)

DOI 10.1007/s10544-020-00487-3

PMID 32419044

发布时间 2021-06-07

翻译满意度评价：

准确一般字义偏差语意偏离译文作用小提交