The Effect of Bottom Profile Dimples on the Femoral Head on Wear in Metal-on-Metal Total Hip Arthroplasty.

导出 OA

翻译打印收藏纠错

作者： J,Jamari ^[1] ; Muhammad Imam,Ammarullah ^[1] ; Amir Putra Md,Saad ^[2] ; Ardiyansyah,Syahrom ^[3] ; Mohammad,Uddin ^[2] ; Emile,van der Heide ^[3] ; Hasan,Basri ^[4]

作者单位： Department of Mechanical Engineering, Faculty of Engineering, Diponegoro University, Tembalang, Semarang 50275, Central Java, Indonesia. ^[1] Applied Mechanics and Design, School of Mechanical Engineering, Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, Skudai 81310, Johor Bahru, Malaysia. ^[2] Medical Device and Technology Center (MEDiTEC), Institute of Human-Centered and Engineering (IHumEn), Universiti Teknologi Malaysia, Skudai 81310, Johor Bahru, Malaysia. ^[3] UniSA STEM, University of South Australia, Mawson Lakes Campus, Mawson Lakes, SA 5095, Australia. ^[4] Laboratory for Surface Technology and Tribology, Faculty of Engineering Technology, University of Twente, P.O. Box 217, 7500 AE Enschede, The Netherlands. ^[5] Department of Mechanical Engineering, Faculty of Engineering, Sriwijaya University, Indralaya 30662, South Sumatera, Indonesia. ^[6]

关键词 bottom profile contact pressure dimple total hip arthroplasty wear

DOI 10.3390/jfb12020038

PMID 34204138

发布时间 2021-07-23

翻译满意度评价：

准确一般字义偏差语意偏离译文作用小提交