Influence of Lignin Content and Pressing Time on Plywood Properties Bonded with Cold-Setting Adhesive Based on Poly (Vinyl Alcohol), Lignin, and Hexamine.

导出 OA

翻译打印收藏纠错

作者： Muhammad Adly Rahandi,Lubis ^[1] ; Ahmad,Labib ^[2] ; Sudarmanto ^[3] ; Fazhar,Akbar ^[1] ; Arif,Nuryawan ^[1] ; Petar,Antov ^[3] ; Lubos,Kristak ^[4] ; Antonios Nikolaos,Papadopoulos ^[5] ; Antonio,Pizzi ^[6]

作者单位： Research Center for Biomass and Bioproducts, National Research and Innovation Agency of Indonesia, Cibinong 16911, Indonesia. ^[1] Research Collaboration Center for Biomass and Biorefinery between BRIN and Universitas Padjadjaran, National Research and Innovation Agency of Indonesia, Cibinong 16911, Indonesia. ^[2] Department of Forest Products Technology, Faculty of Forestry, Universitas Sumatera Utara, Kwala Bekala Campus, Medan 20355, Indonesia. ^[3] Faculty of Forest Industry, University of Forestry, 1797 Sofia, Bulgaria. ^[4] Faculty of Wood Sciences and Technology, Technical University in Zvolen, 96001 Zvolen, Slovakia. ^[5] Laboratory of Wood Chemistry and Technology, Department of Forestry and Natural Environment, International Hellenic University, GR-661 00 Drama, Greece. ^[6] LERMAB, Faculte des Sciences, University of Lorraine, Blvd. des Aiguillettes, 54000 Nancy, France. ^[7]

关键词 PVOH adhesion bio-based adhesives cohesion cold pressing formaldehyde emission hexamine lignin plywood wood-based panels

DOI 10.3390/polym14102111

PMID 35631993

发布时间 2022-07-16

翻译满意度评价：

准确一般字义偏差语意偏离译文作用小提交