首页> Materials (Basel, Switzerland)> Modeling Materials Coextrusion in Polymers Additive Manufacturing.

Modeling Materials Coextrusion in Polymers Additive Manufacturing.

导出 OA

翻译打印收藏纠错

第一作者： Riccardo,Sponchiado

第一单位： Department of Civil, Environmental, and Architectural Engineering, University of Padova, 35122 Padua, Italy.

作者： Riccardo,Sponchiado ^[1] ; Stefano,Rosso ^[1] ; Pierandrea,Dal Fabbro ^[1] ; Luca,Grigolato ^[2] ; Hamada,Elsayed ^[3] ; Enrico,Bernardo ^[4] ; Mattia,Maltauro ^[5] ; Francesca,Uccheddu ^[4] ; Roberto,Meneghello ^[5] ; Gianmaria,Concheri ^[1] ; Gianpaolo,Savio ^[1]

作者单位： Department of Civil, Environmental, and Architectural Engineering, University of Padova, 35122 Padua, Italy. ^[1] Department of Civil, Environmental, and Architectural Engineering, University of Padova, 35122 Padua, Italy.;Department of Industrial Engineering, University of Padova, 35122 Padua, Italy. ^[2] Department of Industrial Engineering, University of Padova, 35122 Padua, Italy.;Refractories, Ceramics and Building Materials Department, National Research Centre, Cairo 12622, Egypt. ^[3] Department of Industrial Engineering, University of Padova, 35122 Padua, Italy. ^[4] Department of Management and Engineering, University of Padova, 35122 Padua, Italy. ^[5]

关键词 additive manufacturing coextrusion fused deposition modeling material extrusion material modeling

DOI 10.3390/ma16020820

PMID 36676557

发布时间 2023-02-01

基金项目

BIRD 190850/Department of Civil, Environmental, and Architectural Engineering - University of Padova 2105-0036-1463-2019/Regional Operational Program F.S.E. 2014-2020 Veneto Region and the European Regional De-velopment Fund POR 2014-2020

翻译满意度评价：

准确一般字义偏差语意偏离译文作用小提交