作者：
Zifan,Zhang [1]
;
Deqiao,Xie [1]
;
Fei,Lv [1]
;
Ruikang,Liu [1]
;
Youwen,Yang [2]
;
Lin,Wang [3]
;
Guofeng,Wu [4]
;
Changjiang,Wang [5]
;
Lida,Shen [6]
;
Zongjun,Tian [7]
作者单位：
College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, 210016, China; Institute of Additive Manufacturing (3D Printing), Nanjing University of Aeronautics and Astronautics, Nanjing, 210016, China.
[1]
Institute of Bioadditive Manufacturing, Jiangxi University of Science and Technology, Nanchang, 330044, China.
[2]
College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, 210016, China; Institute of Additive Manufacturing (3D Printing), Nanjing University of Aeronautics and Astronautics, Nanjing, 210016, China; Nanjing Chamlion Laser Technology Co., Ltd, Nanjing, 210012, China.
[3]
Stomatological Digital Engineering Center, Nanjing Stomatological Hospital, Medical School of Nanjing University, Nanjing, 210008, China.
[4]
Department of Engineering and Design, University of Sussex, Brighton, BN1 9RH, United Kingdom.
[5]
College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, 210016, China; Institute of Additive Manufacturing (3D Printing), Nanjing University of Aeronautics and Astronautics, Nanjing, 210016, China. Electronic address: ldshen@nuaa.edu.cn.
[6]
College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, 210016, China; Institute of Additive Manufacturing (3D Printing), Nanjing University of Aeronautics and Astronautics, Nanjing, 210016, China. Electronic address: tianzj@nuaa.edu.cn.
[7]
DOI
10.1016/j.compbiomed.2023.106716
PMID
36905868
发布时间
2023-04-07
换一批
换一批
