Investigating Additive Manufacturing Possibilities for an Unmanned Aerial Vehicle with Polymeric Materials.

导出 OA

翻译打印收藏纠错

作者： Laura,Šostakaitė ^[1] ; Edvardas,Šapranauskas ^[1] ; Darius,Rudinskas ^[1] ; Arvydas,Rimkus ^[2] ; Viktor,Gribniak ^[3]

作者单位： Department of Aeronautical Engineering, Vilnius Gediminas Technical University (VILNIUS TECH), Linkmenų Str. 28-4, 08217 Vilnius, Lithuania. ^[1] Laboratory of Innovative Building Structures, Vilnius Gediminas Technical University (VILNIUS TECH), Sauletekio Av. 11, 10223 Vilnius, Lithuania. ^[2] Department of Aeronautical Engineering, Vilnius Gediminas Technical University (VILNIUS TECH), Linkmenų Str. 28-4, 08217 Vilnius, Lithuania.;Laboratory of Innovative Building Structures, Vilnius Gediminas Technical University (VILNIUS TECH), Sauletekio Av. 11, 10223 Vilnius, Lithuania. ^[3]

关键词 3D printing bending test mechanical performance polylactic acid (PLA)prototyping

DOI 10.3390/polym16182600

PMID 39339064

发布时间 2024-09-30

翻译满意度评价：

准确一般字义偏差语意偏离译文作用小提交