摘要Carbon Fiber (CF) reinforced polyetheretherketone (PEEK) composite is one of the most promising implant biomaterials used in orthopedics.In this article,unfilled PEEK and CF/PEEK specimens were prepared by vacuum hot pressing method,and their tribological properties were evaluated by sliding against a cobalt-chromium-molybdenum (Co-Cr-Mo) alloy block.The influences of mass fraction of carbon fibers in CF/PEEK and the surface oxidation treatment of carbon fibers were explored.The results showed that the water contact angles on the surfaces of CF/PEEK specimens decreased,indicating that their surface wettability was improved.The hardness value of CF/PEEK was significantly improved,the friction coefficients of CF/PEEK were effectively reduced and its wear resistance was enhanced compared with unfilled PEEK.The leading effect on CF/PEEK tribological properties was the mass fraction of CF,followed by surface oxidation of CF,and the calf serum solution had better lubricity than that of saline and deionized water.